Parts
Description | Remark | ST | |||||
---|---|---|---|---|---|---|---|
cylinder block with pistons oil sump |
2.8 ltr. |
AYL | |||||
1 | 022103011N | crankcase also use: 022 103 157 and piston see illustration: 107-010 |
1 6 6 |
manual
gearbox |
|||
(1) | 022103011P | crankcase housing also use: 022 103 157 and piston see illustration: 107-010 |
1 6 6 |
automatic |
|||
2 | N 90365801 | socket head bolt with innermultipoint head |
M10X78 | 14 | |||
3 | 022103175 | valve |
1 | ||||
4 | 036103113A | end cap |
36,6 | 1 | |||
4A | 035103111B | connector union |
1 | ||||
6 | N 0119034 | end cap |
16 | 3 | |||
7 | 03H103141 | bungs |
B7,3X9,3 | 2 | |||
8 | N 0119103 | end cap |
10 | 2 | |||
9 | N 01191410 | end cap |
24 | 1 | |||
10 | 022103157 | oil spray jet |
6 | ||||
11 | N 91017001 | cylinder pin |
8X18 | 4 | |||
12 | 022103139B | dowel sleeve |
16X13,5 | 2 | |||
13 | 071103233 | pipe union |
1 | ||||
14A | 022103151D | sealing flange |
front |
1 | |||
16 | N 10082912 | bolt, hex. hd. (combi.)self-locking |
M6X16-S1-N | 6 | |||
16 | (N 10082911) | hexagon head bolt (combi) |
M6X16-S1-N; no longer available |
6 | |||
17 | 03H103173 | sealing flange |
rear |
1 | |||
18 | 021103051C | shaft oil seal |
85X105X11 | 1 | |||
19 | N 10082912 | bolt, hex. hd. (combi.)self-locking |
M6X16 | 14 | |||
19 | (N 10082911) | hexagon head bolt (combi) |
M6X16-S1-N; no longer available |
14 | |||
21 | N 10116003 | hexagon head bolt (combi) |
M6X58 | 2 | |||
22 | N 90502601 | dowel sleeve |
14X12 | 2 | |||
23 | 021103601L | engine oil sump |
1 | ||||
(23) | 021103603N | engine oil sump with openingfor oil level sensor |
1 | ||||
24 | D 176501A1 | silicon sealant |
50ML | X | |||
26A | N 90813202 | seal bolt with sealingring |
M14X1,5X22 S20 |
1 | |||
27 | N 10124408 | hexagon socket headbolt (combi) |
M6X20 | 26 | |||
28 | 022103139B | dowel sleeve |
16X13,5 | 2 | |||
33 | N 10041102 | bungs |
30,5 | 1 | |||
34 | Переход к группе | oil level sensor see illustration: 919-060 |