| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| AJUSA |
15091000 |
Shaft Seal, crankshaft |
ArticleState: Normal
|
|
|
|
|
| BF |
20050412003 |
Crankshaft |
Construction year from: 11.1991 ;
Braking / Drive Dynamics: for vehicles with ABS ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
559.030 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Right-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| 081.460 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
Material: FPM (fluoride rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| 453.851 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| ET ENGINETEAM |
LH001500 |
Main Bearings, crankshaft |
Standard Size [STD]: ;
Quantity Unit: Set ;
ArticleState: Normal
|
|
|
|
|
| GLASER |
P77805-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal
|
|
|
|
|
| P77832-01 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GLYCO |
H1015/7 STD |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4053 ;
Standard Size [STD]: ;
ArticleState: Normal
|
|
|
|
|
| H1015/7 0.25mm |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4053 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal
|
|
|
|
|
| H1015/7 0.50mm |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4053 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal
|
|
|
|
|
| A131/4 STD |
Thrust Washer, crankshaft |
Component Number: 54-3622 ;
Standard Size [STD]: ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319558-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 180 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 205 mm ;
ArticleState: Normal
|
|
|
|
|
| 50-319559-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 8 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 45 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 62 mm ;
ArticleState: Normal
|
|
|
|
|
| KOLBENSCHMIDT |
78520620 |
Thrust Washer, crankshaft |
Oversize [mm]: 0.5 mm ;
Component Number: 71183620 ;
Quantity: 4 ;
Quantity Unit: Pair ;
ArticleState: Normal
|
|
|
|
|
| 77751630 |
Crankshaft Bearing Set |
Oversize [mm]: 0.75 mm ;
Component Number: 72186634 ;
Component Number: 72187634 ;
Quantity: 14 ;
Quantity Unit: Kit ;
ArticleState: Normal
|
|
|
|
|
| 77751600 |
Crankshaft Bearing Set |
Standard Size [STD]: ;
Component Number: 72186604 ;
Component Number: 72187604 ;
Quantity: 14 ;
Quantity Unit: Kit ;
ArticleState: Normal ;
General Information: Requer Inmetro
|
|
|
|
|
| 78520600 |
Thrust Washer, crankshaft |
Standard Size [STD]: ;
Component Number: 71183600 ;
Quantity: 4 ;
Quantity Unit: Pair ;
ArticleState: Normal
|
|
|
|
|
| 77751610 |
Crankshaft Bearing Set |
Oversize [mm]: 0.25 mm ;
Component Number: 72186614 ;
Component Number: 72187614 ;
Quantity: 14 ;
Quantity Unit: Kit ;
ArticleState: Normal
|
|
|
|
|
| 78520610 |
Thrust Washer, crankshaft |
Oversize [mm]: 0.25 mm ;
Component Number: 71183610 ;
Quantity: 4 ;
Quantity Unit: Pair ;
ArticleState: Normal
|
|
|
|
|
| 77751620 |
Crankshaft Bearing Set |
Oversize [mm]: 0.5 mm ;
Component Number: 72186624 ;
Component Number: 72187624 ;
Quantity: 14 ;
Quantity Unit: Kit ;
ArticleState: Normal
|
|
|
|
|
| MAHLE ORIGINAL |
037 HS 21041 025 |
Crankshaft Bearing Set |
Component Number: 037HL21040025 ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
for wall thickness from [mm]: 2.61 mm ;
to wall thickness [mm]: 2.747 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| 037 AS 21091 000 |
Thrust Washer, crankshaft |
Component Number: 037AL21090000 ;
for housing diameter from [mm]: 139.68 mm ;
to housing diameter [mm]: 139.93 mm ;
for wall thickness from [mm]: 3.14 mm ;
to wall thickness [mm]: 3.21 mm ;
for shaft diamater from [mm]: 116.59 mm ;
to shaft diameter [mm]: 117.09 mm ;
ArticleState: Normal
|
|
|
|
|
| 037 HS 21041 050 |
Crankshaft Bearing Set |
Component Number: 037HL21040050 ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
for wall thickness from [mm]: 2.735 mm ;
to wall thickness [mm]: 2.997 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: Article to be discontinued
|
|
|
|
|
| 037 HS 21041 075 |
Crankshaft Bearing Set |
Component Number: 037HL21040075 ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
for wall thickness from [mm]: 2.86 mm ;
to wall thickness [mm]: 3.247 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 037 HS 21041 000 |
Crankshaft Bearing Set |
Component Number: 037HL21040000 ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
for wall thickness from [mm]: 2.485 mm ;
to wall thickness [mm]: 2.497 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| 037 HS 21041 100 |
Crankshaft Bearing Set |
Component Number: 037HL21040100 ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
for wall thickness from [mm]: 2.985 mm ;
to wall thickness [mm]: 3.497 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| PAYEN |
NA5360 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 8 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 45 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 62 mm ;
ArticleState: Normal
|
|
|
|
|
| NA5359 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 15 mm ;
Rotation Direction: Anti-clockwise rotation ;
Inner diameter [mm]: 180 mm ;
Material: FPM (fluoride rubber) ;
Outer diameter [mm]: 205 mm ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
031.288 |
Shaft Seal, crankshaft |
Weight [kg]: 0.21 kg ;
Fitting Position: Timing End ;
Inner diameter [mm]: 155 mm ;
Outer diameter [mm]: 180 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 031.460 |
Main Bearings, crankshaft |
Weight [kg]: 0.74 kg ;
Inner diameter [mm]: 30 mm ;
Outer diameter [mm]: 72 mm ;
Height [mm]: 19 mm ;
ArticleState: Normal
|
|
|
|
|
| 032.179 |
Crankshaft |
Supplementary Article/Info 2: without bearing(s) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 031.279 |
Shaft Seal, crankshaft |
Weight [kg]: 0.57 kg ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Height [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
ArticleState: Normal
|
|
|
|
|
| 021.261 |
Main Bearings, crankshaft |
Weight [kg]: 0.51 kg ;
Inner diameter [mm]: 25 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 17 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-42299-00 |
Shaft Seal, crankshaft |
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-35206-10 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Width [mm]: 15 mm ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1259526 |
Main Bearings, crankshaft |
for wall thickness from [mm]: 2.985 mm ;
to wall thickness [mm]: 3.497 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
ArticleState: No longer supplied by manufacturer ;
General Information: Mahle 037 HS 21041 100
|
|
|
|
|
| WG1259523 |
Main Bearings, crankshaft |
for wall thickness from [mm]: 2.61 mm ;
to wall thickness [mm]: 2.747 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
ArticleState: Normal ;
General Information: Mahle 037 HS 21041 025
|
|
|
|
|
| WG1020397 |
Thrust Washer, crankshaft |
Quantity: 4 ;
Quantity Unit: Pair ;
Component Number: 71183620 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 78520620
|
|
|
|
|
| WG1019956 |
Crankshaft Bearing Set |
Quantity: 14 ;
Quantity Unit: Kit ;
Component Number: 72186624 ;
Component Number: 72187624 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 77751620
|
|
|
|
|
| WG1250411 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AB SL ;
ArticleState: Normal ;
General Information: Reinz 81-42299-00
|
|
|
|
|
| WG1190417 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 081.460
|
|
|
|
|
| WG1483714 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Glyco H1015/7 0.25mm
|
|
|
|
|
| WG1259524 |
Main Bearings, crankshaft |
for wall thickness from [mm]: 2.735 mm ;
to wall thickness [mm]: 2.997 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
ArticleState: Article to be discontinued ;
General Information: Mahle 037 HS 21041 050
|
|
|
|
|
| WG1093838 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
ArticleState: Normal ;
General Information: Glyco H1015/7 STD
|
|
|
|
|
| WG1092994 |
Thrust Washer, crankshaft |
ArticleState: Normal ;
General Information: Glyco A131/4 STD
|
|
|
|
|
| WG1019957 |
Crankshaft Bearing Set |
Quantity: 14 ;
Quantity Unit: Kit ;
Component Number: 72186634 ;
Component Number: 72187634 ;
Oversize [mm]: 0.75 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 77751630
|
|
|
|
|
| WG1020395 |
Thrust Washer, crankshaft |
Quantity: 4 ;
Quantity Unit: Pair ;
Component Number: 71183600 ;
ArticleState: Normal ;
General Information: Kolbenschmidt 78520600
|
|
|
|
|
| WG1019954 |
Crankshaft Bearing Set |
Quantity: 14 ;
Quantity Unit: Kit ;
Component Number: 72186604 ;
Component Number: 72187604 ;
ArticleState: Normal ;
General Information: Kolbenschmidt 77751600
|
|
|
|
|
| WG1193642 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 145 mm ;
Outer diameter [mm]: 175 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 559.030
|
|
|
|
|
| WG1483715 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Glyco H1015/7 0.50mm
|
|
|
|
|
| WG1259525 |
Main Bearings, crankshaft |
for wall thickness from [mm]: 2.86 mm ;
to wall thickness [mm]: 3.247 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
ArticleState: No longer supplied by manufacturer ;
General Information: Mahle 037 HS 21041 075
|
|
|
|
|
| WG1212571 |
Main Bearings, crankshaft |
for wall thickness from [mm]: 2.485 mm ;
to wall thickness [mm]: 2.497 mm ;
for shaft diamater from [mm]: 107.978 mm ;
to shaft diameter [mm]: 108 mm ;
for housing diameter from [mm]: 113.04 mm ;
to housing diameter [mm]: 113.065 mm ;
for bearing clearance from [mm]: 0.046 mm ;
to bearing clearance [mm]: 0.117 mm ;
Width from [mm]: 37.5 mm ;
Width to [mm]: 37.8 mm ;
ArticleState: Normal ;
General Information: Mahle 037 HS 21041 000
|
|
|
|
|
| WG1020396 |
Thrust Washer, crankshaft |
Quantity: 4 ;
Quantity Unit: Pair ;
Component Number: 71183610 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 78520610
|
|
|
|
|
| WG1019955 |
Crankshaft Bearing Set |
Quantity: 14 ;
Quantity Unit: Kit ;
Component Number: 72186614 ;
Component Number: 72187614 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Kolbenschmidt 77751610
|
|
|
|
|
| WG1250194 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 180 mm ;
Outer diameter [mm]: 205 mm ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-35206-10
|
|
|
|
|
