| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| BGA |
OS3328 |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Transmission End ;
Shape: Round ;
Engine Block Material: Aluminium ;
Width 1 [mm]: 12 mm ;
Outer diameter 1 [mm]: 105 mm ;
Inner diameter 1 [mm]: 85 mm ;
ArticleState: Normal
|
|
|
|
|
| CORTECO |
20034738B |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 105 mm ;
Height 1 [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Swirl Type: Left-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 20029117B |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 105 mm ;
Height 1 [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| 20034739B |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 55 mm ;
Outer diameter 1 [mm]: 72 mm ;
Height 1 [mm]: 8 mm ;
Dust Cover: with dust lip ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
026.790 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Width [mm]: 8,8 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 173.890 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 55 mm ;
Outer diameter [mm]: 72 mm ;
Width [mm]: 8 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 000.220 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Width [mm]: 8,8 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: No longer supplied by manufacturer ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| GLASER |
P77362-01 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
TecDoc Engine Number: AUDI BAT ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Width [mm]: 8,8 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77444-01 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
TecDoc Engine Number: AUDI BAT ;
Inner diameter [mm]: 55 mm ;
Outer diameter [mm]: 72 mm ;
Width [mm]: 8 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319583-00 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Height [mm]: 8,8 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 827S LD W ;
Inner diameter [mm]: 85 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 105 mm ;
ArticleState: Normal
|
|
|
|
|
| OSSCA |
11071 |
Shaft Seal, crankshaft |
Shape: O-shape ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Height [mm]: 8 mm ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NA5325 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Height [mm]: 8,8 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 827S LD W ;
Inner diameter [mm]: 85 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 105 mm ;
ArticleState: Normal
|
|
|
|
|
| STELLOX |
34-00072-SX |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height 1 [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 105 mm ;
Inner diameter 1 [mm]: 85 mm ;
ArticleState: Normal
|
|
|
|
|
| TRISCAN |
8550 10056 |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 85 mm ;
Outer diameter 1 [mm]: 105 mm ;
Height 1 [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-35553-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
TecDoc Engine Number: AUDI BAT ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Width [mm]: 8,8 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-36026-00 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
TecDoc Engine Number: AUDI BAT ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 55 mm ;
Outer diameter [mm]: 72 mm ;
Width [mm]: 8 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1004848 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Timing End ;
Width [mm]: 8 mm ;
Material: FPM (fluoride rubber) ;
Inner diameter [mm]: 55 mm ;
Outer diameter [mm]: 72 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Glaser P77444-01
|
|
|
|
|
| WG1086667 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Width [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 026.790
|
|
|
|
|
| WG1145433 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Timing End ;
Width [mm]: 8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 55 mm ;
Outer diameter [mm]: 72 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-36026-00
|
|
|
|
|
| WG1460787 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Height [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Radial Shaft Seal Design: 827S LD W ;
Rotation Direction: Anti-clockwise rotation ;
ArticleState: Normal ;
General Information: Payen NA5325
|
|
|
|
|
| WG1497609 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Height [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Radial Shaft Seal Design: 827S LD W ;
Rotation Direction: Anti-clockwise rotation ;
ArticleState: Normal ;
General Information: Goetze 50-319583-00
|
|
|
|
|
| WG1084274 |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Transmission End ;
Height 1 [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 105 mm ;
Inner diameter 1 [mm]: 85 mm ;
ArticleState: Normal ;
General Information: Corteco 20029117B
|
|
|
|
|
| WG1226647 |
Shaft Seal, crankshaft |
Engine Code: BAT ;
Fitting Position: Timing End ;
Height 1 [mm]: 8 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Outer diameter 1 [mm]: 72 mm ;
Inner diameter 1 [mm]: 55 mm ;
ArticleState: Normal ;
General Information: Corteco 20034739B
|
|
|
|
|
| WG1004799 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Width [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Glaser P77362-01
|
|
|
|
|
| WG1103941 |
Shaft Seal, crankshaft |
TecDoc Engine Number: AUDI BAT ;
Fitting Position: Transmission End ;
Width [mm]: 8,8 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 85 mm ;
Outer diameter [mm]: 105 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: A SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-35553-00
|
|
|
|
|
