| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ELRING |
233.530 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Left-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 243.550 |
Shaft Seal, crankshaft |
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: ASW ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| FEBI BILSTEIN |
35609 |
Shaft Seal, crankshaft |
Thickness [mm]: 13 mm ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.14 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 39899 |
Shaft Seal, crankshaft |
Width [mm]: 15 mm ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 180 mm ;
Fitting Position: Transmission End ;
Weight [kg]: 0.165 kg ;
ArticleState: Normal ;
General Information: für Schwungrad
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 35144 |
Shaft Seal, crankshaft |
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 110 mm ;
Outer diameter [mm]: 130 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.125 kg ;
Observe service information: ;
ArticleState: Normal ;
General Information: mit Montagehilfe
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 39900 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Inner diameter [mm]: 136 mm ;
Outer diameter [mm]: 159 mm ;
Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ;
Fitting Position: Timing End ;
Weight [kg]: 0.195 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 35145 |
Shaft Seal, crankshaft |
Thickness [mm]: 13 mm ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.165 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P77798-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| P77797-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GOETZE |
50-319568-00 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 11 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 827S RD W ;
Inner diameter [mm]: 90 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| 50-319569-00 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 827S LD W ;
Inner diameter [mm]: 160 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 190 mm ;
ArticleState: Normal
|
|
|
|
|
| MEYLE |
16-34 099 0004 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 150 mm ;
Outer diameter [mm]: 172 mm ;
Height [mm]: 13 mm ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 16-34 099 0003 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 110 mm ;
Height [mm]: 11 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NA5451 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Height [mm]: 11 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 827S RD W ;
Inner diameter [mm]: 90 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| NA5452 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 827S LD W ;
Inner diameter [mm]: 160 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 190 mm ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
079.081 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal
|
|
|
|
|
| 079.083 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Inner diameter [mm]: 110 mm ;
Outer diameter [mm]: 130 mm ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 079.085 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Height [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
81-37921-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Width [mm]: 11 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-37938-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: A SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1379967 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 233.530
|
|
|
|
|
| WG1191537 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: ASW ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 243.550
|
|
|
|
|
| WG1250330 |
Shaft Seal, crankshaft |
Width [mm]: 11 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 90 mm ;
Outer diameter [mm]: 120 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-37921-00
|
|
|
|
|
| WG1250336 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 160 mm ;
Outer diameter [mm]: 190 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: A SL ;
ArticleState: Normal ;
General Information: Reinz 81-37938-00
|
|
|
|
|
