| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| CORTECO |
01016688B |
Shaft Seal, crankshaft |
Engine Code: D 2066 LF 25 ;
Engine Code: D 2066 LF 36 ;
Engine Code: D 2066 LF 40 ;
Engine Code: D 2066 LF 50 ;
Fitting Position: Transmission End ;
Inner diameter 1 [mm]: 120 mm ;
Outer diameter 1 [mm]: 140 mm ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Left-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| 01017541B |
Shaft Seal, crankshaft |
Engine Code: D 2865, D 2866 ;
Version: ONLY SEAL ;
Fitting Position: Timing End ;
Inner diameter 1 [mm]: 105 mm ;
Outer diameter 1 [mm]: 130 mm ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Dust Cover: with dust lip ;
Swirl Type: Right-hand Twist ;
Supplementary Article/Info 2: with mounting sleeves ;
ArticleState: Normal
|
|
|
|
|
| ELRING |
766.828 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 834.289 ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: No longer supplied by manufacturer ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 766.829 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Additionally required articles (article numbers): 834.289 ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 828.637 |
Shaft Seal, crankshaft |
Fitting Position: Transmission End ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
for components see parts list: ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 13 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| 158.510 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AW/BS ;
Swirl Type: Right-hand Twist ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
|
|
|
|
|
| ET ENGINETEAM |
HK0173 |
Crankshaft |
TecDoc Engine Number: MAN D 2066 LF 25 ;
ArticleState: Normal
|
|
|
|
|
| FEBI BILSTEIN |
33142 |
Shaft Seal, crankshaft |
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Supplementary Info: with sealing lip ;
Fitting Position: Timing End ;
Weight [kg]: 0.12 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 33143 |
Shaft Seal, crankshaft |
Thickness [mm]: 12 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Timing End ;
Weight [kg]: 0.12 kg ;
ArticleState: Normal ;
General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 07720 |
Ring Gear, crankshaft |
Engine Code: D2066LF17 ;
Engine Code: D2066LF23 ;
Engine Code: D2066LF25 ;
Engine Code: D2066LF31 ;
Engine Code: D2066LF34 ;
Engine Code: D2066LF36 ;
Engine Code: D2066LF40 ;
Engine Code: D2066LF44 ;
Engine Code: D2066LF50 ;
Engine Code: D2066LF57 ;
Width [mm]: 21 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Weight [kg]: 0.154 kg ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| 01203 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Colour: Black ;
Material: ACM (Polyacrylate) ;
Material: PTFE (polytetrafluoroethylene) ;
Fitting Position: Transmission End ;
Weight [kg]: 0.097 kg ;
ArticleState: Normal ;
General Information: für Motorgehäuse
;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
|
|
|
|
|
| GLASER |
P76497-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| X59555-01 |
Ring Gear, crankshaft |
Thickness [mm]: 21 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
|
|
|
|
|
| P77475-01 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| GLYCO |
A159/4 STD |
Thrust Washer, crankshaft |
Component Number: 04-3947 ;
Component Number: 04-3948 ;
Standard Size [STD]: ;
ArticleState: Normal
|
|
|
|
|
| H1239/7 STD |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Standard Size [STD]: ;
ArticleState: Normal ;
Technical Information: The following procedures must be carried out according to
the manufacturer's manual: 1) Drill two holes in the bearin
for the valve rocker's oil supply corresponding to the
position of the oil channels in the housing. 2) Drill one
dowel hole.
|
|
|
|
|
| H1239/7 0.25mm |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
Technical Information: "SPUTTER" lower half bearing
|
|
|
|
|
| H1239/7 0.50mm |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Component Number: 72-4527 ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
Technical Information: G-188
|
|
|
|
|
| GOETZE |
50-305151-00 |
Shaft Seal, crankshaft |
TecDoc Engine Number: MAN D 2066 LF 50 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 823S LD ;
Inner diameter [mm]: 120 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 140 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 50-319567-00 |
Shaft Seal, crankshaft |
TecDoc Engine Number: MAN D 2066 LF 50 ;
TecDoc Engine Number: MAN D 2066 LF 25 ;
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 100 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
|
|
|
|
|
| MAHLE ORIGINAL |
001 HS 18592 025 |
Crankshaft Bearing Set |
Oversize [mm]: 0.25 mm ;
Component Number: 001HL10220025 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.126 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 35.95 mm ;
for wall thickness from [mm]: 3.591 mm ;
to wall thickness [mm]: 3.728 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: only supplied in parts list
|
|
|
|
|
| 227 HS 21013 000 |
Crankshaft Bearing Set |
Component Number: 227HL21012000 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.466 mm ;
to wall thickness [mm]: 3.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
|
|
|
|
|
| 001 HS 18592 050 |
Crankshaft Bearing Set |
Oversize [mm]: 0.5 mm ;
Component Number: 001HL10220050 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.126 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 35.95 mm ;
for wall thickness from [mm]: 3.716 mm ;
to wall thickness [mm]: 3.978 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: only supplied in parts list
|
|
|
|
|
| 227 AS 20876 000 |
Thrust Washer, crankshaft |
Component Number: 227AL20875000 ;
for housing diameter from [mm]: 137.65 mm ;
to housing diameter [mm]: 138 mm ;
for wall thickness from [mm]: 3.35 mm ;
to wall thickness [mm]: 3.4 mm ;
for shaft diamater from [mm]: 114.4 mm ;
to shaft diameter [mm]: 114.75 mm ;
ArticleState: Normal
|
|
|
|
|
| 227 HS 21013 025 |
Crankshaft Bearing Set |
Oversize [mm]: 0.25 mm ;
Component Number: 227HL21012025 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.591 mm ;
to wall thickness [mm]: 3.728 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
|
|
|
|
|
| 001 HS 18592 075 |
Crankshaft Bearing Set |
Oversize [mm]: 0.75 mm ;
Component Number: 001HL10220075 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.126 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 35.95 mm ;
for wall thickness from [mm]: 3.841 mm ;
to wall thickness [mm]: 4.228 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: only supplied in parts list
|
|
|
|
|
| 001 HS 18592 000 |
Crankshaft Bearing Set |
Component Number: 001HL10220000 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.126 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 35.95 mm ;
for wall thickness from [mm]: 3.466 mm ;
to wall thickness [mm]: 3.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: only supplied in parts list
|
|
|
|
|
| 227 HS 21013 050 |
Crankshaft Bearing Set |
Oversize [mm]: 0.5 mm ;
Component Number: 227HL21012050 ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
for wall thickness from [mm]: 3.716 mm ;
to wall thickness [mm]: 3.978 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: Normal
|
|
|
|
|
| 001 HS 18592 100 |
Crankshaft Bearing Set |
Oversize [mm]: 1 mm ;
Component Number: 001HL10220100 ;
for bearing clearance from [mm]: 0.06 mm ;
to bearing clearance [mm]: 0.126 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 35.95 mm ;
for wall thickness from [mm]: 3.966 mm ;
to wall thickness [mm]: 4.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
ArticleState: only supplied in parts list
|
|
|
|
|
| MEYLE |
12-34 099 0007 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Height [mm]: 12 mm ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| PAYEN |
NB966 |
Shaft Seal, crankshaft |
TecDoc Engine Number: MAN D 2066 LF 62 ;
TecDoc Engine Number: MAN D 2066 LF 50 ;
TecDoc Engine Number: MAN D 2066 LF 25 ;
TecDoc Engine Number: MAN D 2066 LF 36 ;
TecDoc Engine Number: MAN D 2066 LF 40 ;
Fitting Position: Transmission End ;
Height [mm]: 13 mm ;
Rotation Direction: Anti-clockwise rotation ;
Radial Shaft Seal Design: 823S LD ;
Inner diameter [mm]: 120 mm ;
Material: ACM (Polyacrylate) ;
Outer diameter [mm]: 140 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| NA5450 |
Shaft Seal, crankshaft |
TecDoc Engine Number: MAN D 2066 LF 36 ;
TecDoc Engine Number: MAN D 2066 LF 62 ;
TecDoc Engine Number: MAN D 2066 LF 40 ;
TecDoc Engine Number: MAN D 2066 LF 25 ;
TecDoc Engine Number: MAN D 2066 LF 50 ;
Fitting Position: Timing End ;
Height [mm]: 12 mm ;
Rotation Direction: Clockwise rotation ;
Radial Shaft Seal Design: 829S RD W ;
Inner diameter [mm]: 100 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Outer diameter [mm]: 130 mm ;
ArticleState: Normal
|
|
|
|
|
| PE Automotive |
030.402-00A |
Shaft Seal, crankshaft |
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Radial Shaft Seal Design: B1BASLLD ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Supplementary Article/Info 2: with mounting sleeve ;
Weight [kg]: 0.104 kg ;
ArticleState: Normal
|
|
|
|
|
| 030.398-00A |
Shaft Seal, crankshaft |
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Radial Shaft Seal Design: B1BASLLD ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Weight [kg]: 0.089 kg ;
ArticleState: Normal
|
|
|
|
|
| SAMPA |
021.075 |
Shaft Seal, crankshaft |
Fitting Position: Timing End ;
Inner diameter [mm]: 105 mm ;
Outer diameter [mm]: 130 mm ;
Height [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 021.449 |
Crankshaft |
Supplementary Article/Info 2: without bearing(s) ;
Weight [kg]: 108 kg ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 023.115 |
Ring Gear, crankshaft |
Inner diameter [mm]: 97 mm ;
Outer diameter [mm]: 102.3 mm ;
Height [mm]: 17.6 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 021.452 |
Crankshaft |
Supplementary Article/Info 2: without bearing(s) ;
Weight [kg]: 108.5 kg ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 010.216 |
Shaft Seal, crankshaft |
Weight [kg]: 0.5 kg ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Material: FPM (fluoride rubber) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| 022.165 |
Hub, crankshaft |
ArticleState: Normal
|
|
|
|
|
| 021.261 |
Main Bearings, crankshaft |
Weight [kg]: 0.51 kg ;
Inner diameter [mm]: 25 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 17 mm ;
ArticleState: Normal
|
|
|
|
|
| 100.055 |
Ring Gear, crankshaft |
Weight [kg]: 0.76 kg ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Height [mm]: 21 mm ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: No Hardened
|
|
|
|
|
| 021.252 |
Ring Gear, crankshaft |
Fitting Position: Front ;
Inner diameter [mm]: 99.5 mm ;
Outer diameter [mm]: 105 mm ;
Outer diameter 1 [mm]: 108 mm ;
Height [mm]: 18 mm ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: No Hardened
|
|
|
|
|
| 021.072 |
Shaft Seal, crankshaft |
Weight [kg]: 1.04 kg ;
Fitting Position: Transmission End ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Height [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
ArticleState: Normal
|
|
|
|
|
| 200.080 |
Main Bearings, crankshaft |
Weight [kg]: 1.32 kg ;
Inner diameter [mm]: 25 mm ;
Outer diameter [mm]: 62 mm ;
Height [mm]: 24 mm ;
ArticleState: Normal
|
|
|
|
|
| 100.055/1 |
Ring Gear, crankshaft |
Weight [kg]: 0.78 kg ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
Height [mm]: 21 mm ;
Machining: Hardened ;
ArticleState: Normal ;
Technical Information: Surface Hardened
|
|
|
|
|
| 021.252/1 |
Ring Gear, crankshaft |
Fitting Position: Front ;
Inner diameter [mm]: 99.5 mm ;
Outer diameter [mm]: 105 mm ;
Outer diameter 1 [mm]: 108 mm ;
Height [mm]: 18 mm ;
Machining: Hardened ;
ArticleState: Normal ;
Technical Information: Surface Hardened
|
|
|
|
|
| ST-TEMPLIN |
08.160.1905.980 |
Ring Gear, crankshaft |
Thickness [mm]: 22 mm ;
Inner diameter [mm]: 115 mm ;
Outer diameter [mm]: 120 mm ;
ArticleState: Normal
|
|
|
|
|
| VICTOR REINZ |
71-28368-00 |
Ring Gear, crankshaft |
Thickness [mm]: 21 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
|
|
|
|
|
| 81-23113-30 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Supplementary Article/Info 2: with mounting sleeve ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB SL ;
Swirl Type: Left-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| 81-38069-00 |
Shaft Seal, crankshaft |
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Width [mm]: 12 mm ;
Radial Shaft Seal Design: AB ;
Swirl Type: Right-hand Twist ;
ArticleState: Normal
|
|
|
|
|
| WILMINK GROUP |
WG1147605 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 766.829
|
|
|
|
|
| WG1093961 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
ArticleState: Normal ;
General Information: Glyco H1239/7 STD
|
|
|
|
|
| WG1246896 |
Ring Gear, crankshaft |
Fitting Position: Transmission End ;
Thickness [mm]: 21 mm ;
ArticleState: Normal ;
General Information: Reinz 71-28368-00
|
|
|
|
|
| WG1213991 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 3.466 mm ;
to wall thickness [mm]: 3.478 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 000
|
|
|
|
|
| WG1220144 |
Shaft Seal, crankshaft |
Engine Code: D 2865, D 2866 ;
Fitting Position: Timing End ;
Height 1 [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Right-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 130 mm ;
Inner diameter 1 [mm]: 105 mm ;
ArticleState: Normal ;
General Information: Corteco 01017541B
|
|
|
|
|
| WG1190942 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Elring 158.510
|
|
|
|
|
| WG1103916 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Material: ACM (Polyacrylate) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AB SL ;
Supplementary Article/Info 2: with mounting sleeve ;
ArticleState: Normal ;
General Information: Reinz 81-23113-30
|
|
|
|
|
| WG1186344 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.25 mm ;
ArticleState: Normal ;
General Information: Glyco H1239/7 0.25MM
|
|
|
|
|
| WG1263352 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 3.591 mm ;
to wall thickness [mm]: 3.728 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Oversize [mm]: 0.25 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 025
|
|
|
|
|
| WG1195330 |
Shaft Seal, crankshaft |
Width [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ;
Inner diameter [mm]: 120 mm ;
Outer diameter [mm]: 140 mm ;
Swirl Type: Left-hand Twist ;
Radial Shaft Seal Design: AW/BS ;
Dust Cover: with dust lip ;
ArticleState: Normal ;
General Information: Elring 828.637
|
|
|
|
|
| WG1103957 |
Shaft Seal, crankshaft |
Width [mm]: 12 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Inner diameter [mm]: 100 mm ;
Outer diameter [mm]: 130 mm ;
Swirl Type: Right-hand Twist ;
Radial Shaft Seal Design: AB ;
ArticleState: Normal ;
General Information: Reinz 81-38069-00
|
|
|
|
|
| WG1093003 |
Thrust Washer, crankshaft |
ArticleState: Normal ;
General Information: Glyco A159/4 STD
|
|
|
|
|
| WG1186345 |
Main Bearings, crankshaft |
Position / Degree: 1,2,3,4,5,6,7 º ;
Oversize [mm]: 0.5 mm ;
ArticleState: Normal ;
General Information: Glyco H1239/7 0.50MM
|
|
|
|
|
| WG1263353 |
Crankshaft Bearing Set |
for wall thickness from [mm]: 3.716 mm ;
to wall thickness [mm]: 3.978 mm ;
for shaft diamater from [mm]: 103.98 mm ;
to shaft diameter [mm]: 104 mm ;
for housing diameter from [mm]: 111 mm ;
to housing diameter [mm]: 111.022 mm ;
Oversize [mm]: 0.5 mm ;
Width from [mm]: 36 mm ;
ArticleState: Normal ;
General Information: Mahle 227 HS 21013 050
|
|
|
|
|
| WG1220093 |
Shaft Seal, crankshaft |
Engine Code: D 2066 LF 25 ;
Engine Code: D 2066 LF 36 ;
Engine Code: D 2066 LF 40 ;
Engine Code: D 2066 LF 50 ;
Fitting Position: Transmission End ;
Height 1 [mm]: 13 mm ;
Material: PTFE (polytetrafluoroethylene) ;
Swirl Type: Left-hand Twist ;
Dust Cover: with dust lip ;
Supplementary Article/Info 2: with mounting sleeves ;
Outer diameter 1 [mm]: 140 mm ;
Inner diameter 1 [mm]: 120 mm ;
ArticleState: Normal ;
General Information: Corteco 01016688B
|
|
|
|
|
