| Supplier |
Number |
Part name |
Criteria |
Show Article Details |
|
| ACEMARK |
214034 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
ArticleState: Normal
|
|
|
|
|
| AUTEX |
822310 |
Joint Kit, drive shaft |
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
ArticleState: on demand
|
|
|
|
|
| AUTOTEAM |
G450053 |
Joint Kit, drive shaft |
Joint Type: Disc Joint ;
Length [mm]: 32 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 99,7 mm ;
Fitting Position: Front and Rear ;
ArticleState: Normal
|
|
|
|
|
| BGA |
CV0106B |
Joint, drive shaft |
Fitting Position: Rear Axle ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Height 1 [mm]: 32 mm ;
Diameter 1 [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| BUGIAD |
BSP23879 |
Joint, drive shaft |
Fitting Position: Transmission End ;
Joint Type: CV Joint ;
ArticleState: Normal
|
|
|
|
|
| CAR |
GVW8420K |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
for article number: GVW8420K ;
Internal Teeth, wheel side: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| GAD8430K |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
for article number: GAD8430K ;
Internal Teeth, wheel side: 28 ;
Outer diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| CDX |
090 |
Joint Kit, drive shaft |
Joint diameter (mm): 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
ArticleState: Normal
|
|
|
|
|
| CEVAM |
6252N2 |
Joint Kit, drive shaft |
Construction year to: 07.1985 ;
Fitting Position: Rear Axle Left ;
Fitting Position: Rear Axle Right ;
Transmission Type: Manual Transmission ;
Transmission Type: Fully Automatic ;
Fitting Position: Transmission End ;
Joint Type: Disc Joint ;
Joint diameter (mm): 100 mm ;
Seal Material: NBR (nitrile butadiene rubber) ;
Diameter 2 [mm]: 23 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Length [mm]: 33 mm ;
Number of Bores: 6 ;
Bore Ø [mm]: 8,2 mm ;
Bolt Hole Circle Ø [mm]: 86 mm ;
ArticleState: Normal
|
|
|
|
|
| CIFAM |
617-001 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| 617-014 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 28 ;
Outer diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| COMLINE |
ECV051 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Wheel Side ;
Outer teething differential side: 33 ;
Internal Teeth, wheel side: 33 ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| ECV183 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Diameter [mm]: 108 mm ;
Internal Teeth, wheel side: 28 ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| DYNAMATRIX |
DCV661003 |
Joint Kit, drive shaft |
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
Fitting Position: Transmission End ;
ArticleState: Normal
|
|
|
|
|
| EAI |
CV23009K |
Joint Kit, drive shaft |
Internal Teeth, wheel side: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| ERA Benelux |
CVN12066 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| FARCOM |
240235 |
Joint Kit, drive shaft |
Fitting Position: Wheel Side ;
Internal Teeth, wheel side: 33 ;
Outer diameter [mm]: 100 mm ;
Braking / Drive Dynamics: for vehicles with ABS ;
ArticleState: Normal
|
|
|
|
|
| 240244 |
Joint Kit, drive shaft |
Internal Teeth, wheel side: 28 ;
Outer diameter [mm]: 108,3 mm ;
Fitting Position: Wheel Side ;
Braking / Drive Dynamics: for vehicles with ABS ;
ArticleState: Normal
|
|
|
|
|
| 134209 |
Joint Kit, drive shaft |
Fitting Position: Wheel Side ;
Diameter 1/ Diameter 2 [mm]: 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
ArticleState: Normal
|
|
|
|
|
| FENOX |
CV17141 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Joint Type: CV Joint ;
Internal Teeth, wheel side: 28 ;
ArticleState: Normal
|
|
|
|
|
| GENERAL RICAMBI |
WW2007K |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Internal Teeth, wheel side: 33 ;
Diameter [mm]: 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
ArticleState: Normal
|
|
|
|
|
| WW2007 |
Joint, drive shaft |
Fitting Position: Transmission End ;
Internal Teeth, wheel side: 33 ;
Diameter [mm]: 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
ArticleState: Normal
|
|
|
|
|
| GSP |
661003 |
Joint Kit, drive shaft |
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
ArticleState: Normal
|
|
|
|
|
| IPD |
32-2235 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| 32-2248 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 28 ;
Outer diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| JP GROUP |
8153100310 |
Joint Kit, drive shaft |
Fitting Position: Rear Axle ;
Joint Type: CV Joint ;
Full Set: ;
Length [mm]: 542 mm ;
ArticleState: Normal
|
|
|
|
|
| 8153100319 |
Joint Kit, drive shaft |
Fitting Position: Rear Axle ;
Joint Type: CV Joint ;
Full Set: ;
Length [mm]: 542 mm ;
ArticleState: Normal
|
|
|
|
|
| 8153400100 |
Joint, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Wheel Side ;
Joint Type: CV Joint ;
Supplementary Article/Supplementary Info: with gaskets/seals ;
ArticleState: Normal
|
|
|
|
|
| 8153500110 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Wheel Side ;
Joint Type: CV Joint ;
ArticleState: Normal
|
|
|
|
|
| KAMOKA |
8094 |
Joint Kit, drive shaft |
Joint Type: Universal Joint ;
Joint diameter (mm): 100 mm ;
ArticleState: not available
|
|
|
|
|
| LÖBRO |
302255 |
Joint Kit, drive shaft |
Joint Type: Disc Joint ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Machined: without groove in internal component ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
Supplementary Article/Info 2: with cap ;
Bore Ø [mm]: 8,2 mm ;
Number of Bores: 6 ;
Bolt Hole Circle Ø [mm]: 86 mm ;
Supplementary Article/Info 2: with rubber bellow ;
New Part: ;
Part number of the recommended special tools: 190135 ;
ArticleState: Normal
|
|
|
|
|
| 301137 |
Joint, drive shaft |
Joint Type: Disc Joint ;
Length [mm]: 32 mm ;
Machined: without groove in internal component ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Bore Ø [mm]: 8,2 mm ;
Number of Bores: 6 ;
Bolt Hole Circle Ø [mm]: 86 mm ;
New Part: ;
ArticleState: Normal
|
|
|
|
|
| LPR |
KVW805 |
Joint Kit, drive shaft |
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Outer diameter [mm]: 100 mm ;
for article number: KVW805 ;
ArticleState: Normal
|
|
|
|
|
| MASTER-SPORT |
302248-SET-MS |
Joint Kit, drive shaft |
Joint Type: Disc Joint ;
Fitting Position: Transmission End ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Length [mm]: 32 mm ;
Joint diameter (mm): 100 mm ;
ArticleState: Normal
|
|
|
|
|
| 302255-SET-MS |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Wheel Side ;
Internal Teeth, wheel side: 33 ;
Machined: without groove in internal component ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
Number of Holes: 6 ;
Bolt Hole Circle Ø [mm]: 86 mm ;
Joint Type: Disc Joint ;
ArticleState: Normal
|
|
|
|
|
| MAXGEAR |
49-0285 |
Joint Kit, drive shaft |
Fitting Position: Wheel Side ;
Fitting Position: Transmission End ;
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| METELLI |
16-1001 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| 16-1014 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 28 ;
Outer diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| METZGER |
7110142 |
Joint Kit, drive shaft |
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
ArticleState: Normal
|
|
|
|
|
| MEYLE |
100 498 0049 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Wheel Side ;
Joint Type: CV Joint ;
Drive Shaft: without ABS ring ;
Length [mm]: 32 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| NK |
514711 |
Joint Kit, drive shaft |
Outer teething differential side: 33 ;
ArticleState: Normal
|
|
|
|
|
| ODM-MULTIPARTS |
14-216033 |
Joint Kit, drive shaft |
Seal Diameter [mm]: 100 mm ;
Internal Teeth, wheel side: 33 ;
ArticleState: Normal
|
|
|
|
|
| OPEN PARTS |
CVJ5398.20 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Internal Teeth, wheel side: 33 ;
Outer diameter [mm]: 100 mm ;
Length 2 [mm]: 34 mm ;
ArticleState: Normal
|
|
|
|
|
| CVJ5412.20 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Internal Teeth, wheel side: 28 ;
Outer diameter [mm]: 108 mm ;
Length 2 [mm]: 28 mm ;
ArticleState: Normal
|
|
|
|
|
| OPTIMAL |
CT-1015 |
Joint Kit, drive shaft |
Fitting Position: Wheel Side ;
Fitting Position: Transmission End ;
Fitting Position: Rear Axle Left ;
Fitting Position: Rear Axle Right ;
Construction year to: 07.1985 ;
Transmission Type: Manual Transmission ;
Transmission Type: Automatic Transmission ;
Joint Type: Disc Joint ;
Length [mm]: 32 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 99,7 mm ;
ArticleState: Normal
|
|
|
|
|
| PASCAL |
G7W015PC |
Joint Kit, drive shaft |
Seal Diameter [mm]: 108 mm ;
Internal Teeth, wheel side: 28 ;
ArticleState: Normal
|
|
|
|
|
| G7W014PC |
Joint Kit, drive shaft |
ArticleState: not available
|
|
|
|
|
| PATRON |
PCV3014 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 28 ;
Outer diameter [mm]: 108 mm ;
ArticleState: Normal
|
|
|
|
|
| PCV3001 |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| PROFIT |
2810-1001 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Rear Axle ;
Fitting Position: Wheel Side ;
ArticleState: Normal
|
|
|
|
|
| 2810-1014 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Front Axle ;
Parameter: 251613 ;
ArticleState: Normal
|
|
|
|
|
| RUVILLE |
75451 |
Joint, drive shaft |
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: No longer supplied by manufacturer
|
|
|
|
|
| 75451S |
Joint Kit, drive shaft |
Joint Type: CV Joint ;
Outer diameter [mm]: 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
ArticleState: Normal
|
|
|
|
|
| sbs |
1914514711 |
Joint Kit, drive shaft |
Outer teething differential side: 33 ;
ArticleState: Normal
|
|
|
|
|
| SHAFTEC |
PJ90N |
Joint, drive shaft |
Diameter [mm]: 100 mm ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Overall Height [mm]: 32 mm ;
ArticleState: Normal
|
|
|
|
|
| SKF |
VKJA 8004 |
Joint Kit, drive shaft |
Length [mm]: 32 mm ;
Bore Ø [mm]: 8,5 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Number of Bores: 6 ;
Outer diameter [mm]: 100 mm ;
Bolt Hole Circle Ø [mm]: 86 mm ;
Joint Type: Disc Joint ;
Machined: with groove in inner part (inside) ;
ArticleState: Normal
|
|
|
|
|
| SPIDAN |
24915 |
Joint, drive shaft |
Joint Type: Disc Joint ;
Length [mm]: 32 mm ;
Machined: without groove in internal component ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Bore Ø [mm]: 8,2 mm ;
Number of Bores: 6 ;
Bolt Hole Circle Ø [mm]: 86 mm ;
New Part: ;
ArticleState: Normal
|
|
|
|
|
| 22407 |
Joint Kit, drive shaft |
Joint Type: Disc Joint ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Machined: without groove in internal component ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
Supplementary Article/Info 2: with cap ;
Bore Ø [mm]: 8,2 mm ;
Number of Bores: 6 ;
Bolt Hole Circle Ø [mm]: 86 mm ;
Supplementary Article/Info 2: with rubber bellow ;
New Part: ;
Part number of the recommended special tools: 190135 ;
ArticleState: Normal
|
|
|
|
|
| STELLOX |
160 1001-SX |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Joint Type: CV Joint ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
ArticleState: Normal
|
|
|
|
|
| TALOSA |
77-VW-5075 |
Joint Kit, drive shaft |
Fitting Position: Rear Axle ;
Fitting Position: Transmission End ;
Length [mm]: 32 mm ;
Material: Cast Steel ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Weight [kg]: 1,735609 kg ;
ArticleState: Normal
|
|
|
|
|
| TOPRAN |
110 022 |
Joint Kit, drive shaft |
Joint Type: Disc Joint ;
Joint Type: CV Joint ;
Supplementary Article/Supplementary Info: with add-on material ;
Lubrication: with grease lubrication ;
Supplementary Article/Info 2: with bellow ;
Joint diameter (mm): 100 mm ;
Full Set: ;
ArticleState: Normal ;
Installation Information: Einbauort ist fahrzeugabhängig
|
|
|
|
|
| TORQUE |
VN5804 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Joint Type: Tripot Joint ;
ArticleState: Normal
|
|
|
|
|
| TrakMotive |
45-0053 |
Joint Kit, drive shaft |
Construction year to: 07.1985 ;
Transmission Type: Fully Automatic ;
Transmission Type: Manual Transmission ;
Fitting Position: Wheel Side ;
Fitting Position: Transmission End ;
Fitting Position: Rear Axle Left ;
Fitting Position: Rear Axle Right ;
Length [mm]: 32 mm ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint Type: Disc Joint ;
Joint diameter (mm): 99,7 mm ;
Protective Sleeve Material: Elastomer ;
ArticleState: Normal
|
|
|
|
|
| VAICO |
V10-7277 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Fitting Position: Rear Axle ;
Fitting Position: Wheel Side ;
Int. teeth, diff.side, conn.to transm.: 33 ;
Outer diameter [mm]: 100 mm ;
Joint Type: CV Joint ;
ArticleState: Normal ;
General Information:
https://www.autoteile.de/produkt/V10-7277
|
|
|
|
|
| ZEKKERT |
GS-3192 |
Joint Kit, drive shaft |
Fitting Position: Transmission End ;
Int.teeth, diff.side, conn.to conn.shaft: 33 ;
Joint diameter (mm): 100 mm ;
Length [mm]: 32 mm ;
Weight [kg]: 1,83 kg ;
ArticleState: Normal
|
|
|
|
|
